Maintenance of Rice Reaper Harvester

As an important equipment in agricultural production, rice reaper harvester plays a very important role in rice/wheat/paddy harvesting. Due to the long-term use and the wear of mechanical parts, rice reaper harvesters often have various failures in their work. In order to ensure the smooth harvest of rice/wheat/paddy, it is very important to maintain the harvester in time. This article will introduce the common faults of rice reaper harvester and its maintenance methods to help you better understand and maintain rice reaper harvester.

A, Blade Failure

The cutter of rice reaper harvester is directly used to harvest rice, so it often fails because of damage. When the cutter fails, it is necessary to replace the new blade or repair the old blade in time. The specific maintenance methods are as follows:

1. Blade repair: For a slightly worn blade, a chipper can be used to repair it. First remove the blade, then repair it with a grinder, and finally reinstall it.

2. Blade replacement: For severely worn blades, it is necessary to replace them with new ones in time. When replacing the blade, it is necessary to pay attention to the specifications and models of the blade and select the appropriate blade for replacement.

B, The Transmission System Failure

The transmission system of rice reaper harvester is a key component for transmitting power. Once it breaks down, the whole harvester will not work normally. Common faults of transmission system include broken chain, loose belt and damaged transmission shaft. For the fault of transmission system, the following maintenance methods need to be taken:

1. Chain replacement: When the transmission chain is broken or seriously worn, a new chain needs to be replaced in time, and a suitable chain needs to be selected for replacement.

2. Belt adjustment: When the transmission belt is loose, it is necessary to adjust the belt properly to ensure its proper tension and good transmission effect.

3. Maintenance of transmission shaft: If the transmission shaft is seriously worn, it needs to be repaired or replaced to ensure the transmission effect.